AC Clutch Puller For Car Auto Air Conditioning To Remove, Install, Or Rebuild Clutches Found On Fs6, C171, 6P, And 148 Compressors; Gm R4 And A6, Hr-6, Da-6 And V A/C Compressors; Sander Compressors Sd 505, 507, 575, 708, And 709; Wide Application Of Vehicles Including Gm, Ford, Chrysler, Imports, And Other Makes And Models; Check Vehicle Owner’s Manual For a List Of Compatible Compressors

Constructed From Stainless Steel With a Black Coated Finish For Ultimate Strength And Longevity; Resists Rust And Corrosion With Proper Care And Lubrication; 2 And 3 Hold Puller Plate Allows Mechanical Force To Do All Of The Pulling On Most Clutches

Keep All Threads Clean And Well-Oiled; Outer Part Of Tool Has Smooth Side And Threaded Side (Threads Used To Attach To Inner Clutch Shaft When Removing); Start With One Bearing Between Tool And Clutch, And Thread Down Fully Onto Compressor's Inner Shaft Threads (This Is The Fixed Part - Inner Bolt Does Not Move When Threading Down Outer Piece); Remove Tool And Stack Other Bearing On To Take Up The Distance The Clutch Pushed Into Pulley

Package Includes:

1Set Of A/C Puller Remover Tool Kit

Package In Case (Blue/Red Randomly), Not Such As Some Chinese Rubbish Packed In Cheap Carton

Fitment:

Replaces Clutches Found On Fs6, C171, 6P, And 148 Compressors, Gm R4 And A6, Hr -6, Da -6 And V5 A/C Compressors, Sanyo Compressors Sd505, 507, 510, 708, And 709.

2 And 3 Hole Puller Plate Fits Most Clutches, Mechanical Force Does The Pulling.

Constructed From Stainless Steel With a Black Coated Finish For Ultimate Strength And Longevity; Resists Rust And Corrosion With Proper Care And Lubrication.

Note：

Does Not Have Instruction & Manual

Keep All Threads Clean And Well-Oiled;

Outer Part Of Tool Has Smooth Side And Threaded Side (Threads Used To Attach To Inner Clutch Shaft When Removing);

Start With One Bearing Between Tool And Clutch, And Thread Down Fully Onto Compressor's Inner Shaft Threads (This Is The Fixed Part - Inner Bolt Does Not Move When Threading Down Outer Piece);

Remove Tool And Stack Other Bearing On To Take Up The Distance The Clutch Pushed Into Pulley.

Item Number:

TBTK-ACC001